Epoxy Resin – Trustic

Crystal Clear Casting Epoxy Resin: Suitable for most crafts and hobby projects such as Jewelry Casting, River Tables, Canvas Painting and Coins casting purposes etc. It comes in two parts - Resin & Hardener. These two parts MUST be mixed in precise ratio and mixed well to get best results.Features:Crystal clear, high gloss and transparentAutomatic leveling and anti-foamingLow set-to-touch and cure timeGoes well with pigments of all colorsNon toxic, low odor and low VOCHigh hardness after dryingGlossy like mirrorTechnical Specifications:Ratio A:B: 2.7 : 1 (by volume)Pot Life: 30 minCoverage: 0.8 Kg required for 1 mm thickness of 1 square meter areaSet to touch time: 12 hrsCuring Time: 18 hrs (varies based on ambient temp / humidity / thickness)Surface ready to use time: 72 hrsDirections:Step 1: Wear safety glasses and gloves. Measure 2.7 parts of part A and 1 part of part B by volume. Mix thoroughly.Step 2: On porous objects such as made out of wood, paint a seal coat of same epoxy mixture of A & B first to seal any pores to prevent air bubbles from forming.Step 3: Make sure the surface area is horizontal to the ground and leveled. Pour the epoxy on the surface all the way through the area. This epoxy self levels itself so no need to move it around with any tools. Let the epoxy fall over the edges and coat the vertical edges. The liquid epoxy that falls over the edges will form bumps and there is no need to worry about that. These can be sanded off once the epoxy is dried and cured.Step 4: If multiple flood coats are to be applied, make sure that each flood coat is less than 1/2" thick and maintain a gap of 4 hours between each flood coat.Step 5: Pop air bubbles using a heat gun or plumber torch.Step 6: Leave the surface for epoxy curing
FULL SATISFACTION GUARANTEED!! Crystal Clear Casting Epoxy Resin: Suitable for most crafts and hobby projects such as Jewelry Casting, River Tables, Canvas Painting and Coins casting purposes etc. It comes in two parts - Resin & Hardener. These two parts MUST be mixed in precise ratio and mixed well to get best results. Note: Make sure to store the epoxy resin jugs away from direct sunlight at room temperature around 20 to 22 deg C. Keep your project at room temperature so that the project surface is not too cold before pouring epoxy on it.     Features: Crystal clear, high gloss and transparent, yellow resistantAutomatic leveling and anti-foamingLow set-to-touch and cure timeGoes well with pigments of all colorsNon toxic, low odor and low VOCHigh hardness after dryingGlossy like mirrorTechnical Specifications:Ratio A to B: 2.7 to 1 (by volume) OR 3 to 1 (by weight)Pot Life: 30 minCoverage: 1 thickness for 1 sq ft area needs about 2.5 L of epoxy (Part A + B)Set to touch time: 12-14 hrsCuring Time: 20 - 24 hrs (varies based on ambient temp / humidity / thickness)Surface ready to use time: 72 hrsDirections:Step 1: Wear safety glasses and gloves. Measure 2.7 parts of part A and 1 part of part B by volume (OR 3 to 1 by weight). Mix thoroughly.Step 2: On porous objects such as made out of wood, paint a seal coat of same epoxy mixture of A & B first to seal any pores to prevent air bubbles from forming.Step 3: Make sure the surface area is horizontal to the ground and leveled. Pour the epoxy on the surface all the way through the area. This epoxy self levels itself so no need to move it around with any tools. Let the epoxy fall over the edges and coat the vertical edges. The liquid epoxy that falls over the edges will form bumps and there is no need to worry about that. These can be sanded off once the epoxy is dried and cured.Step 4: If multiple flood coats are to be applied, make sure that each flood coat is less than 1/2 thick and maintain a gap of 4 hours between each flood coat.Step 5: Pop air bubbles using a heat gun or plumber torch.Step 6: Leave the surface for epoxy curing   MSDS can be downloaded from here

Round Epoxy Table, Epoxy Resin River Table, Luxury Furniture, Living Room Table, Ocean Rustic Table, Coffee Table, Farmhouse Table

FULL SATISFACTION GUARANTEED!!, Slow Cure Casting Epoxy Resin: This resin has longer curing time and therefore is suitable for project where thick

Slow Cure Casting Epoxy Resin (for thick pours)

ABT – 406 Wood Bench, Epoxy Benches

Pigments for Epoxy Resin – Trustic

TUZECH Dining Blue River Table Made in a Modern Rustic Finish with Bla – Tuzech store

Trustic (@trustic_ca) • Instagram photos and videos

Epoxy Resin – Trustic

Clear Green Epoxy Table, Transparent Rustic Epoxy Resin Table, Round Wood Tables

Use these molds with our General Casting Epoxy Resin to create interesting objects. Just mix and pour the resin into the mold and let it sit for

Silicon Molds for Epoxy Resin Objects

Rustic Epoxy Bullet Deer Antler River Table Ammo Hunting Accent Table Resin Bullet Table Hunting

Silicon Molds for Epoxy Resin Objects – Trustic