Shelly 2.5 as pulse relay to switch existing dimmer - Configuration - Home Assistant Community

I have a dimmer (Jung 1731DD) which is mainly operated manually, but I would like to switch this dimmer on in case I’m not at home. This dimmer can be switched on/off using a pulse signal (relay on for 100ms). To make this work I have a Shelly 2.5.: One port is used as pulse relay (shelly is configured to automatically switch off after 0.1s). the other port of the shelly (always on) to feed the dimmer and measure the power consumption of the dimmer The shelly 2.5 is controlled via MQTT. C

Shelly 2.5 integration with HA - Configuration - Home Assistant Community

Shelly Family Overview – API Reference

Shelly support group (English Version), I have a Shelly 1, 12vdc, 2-way application

Integrating Shelly 2.5 using MQTT - Hardware - Home Assistant Community

Switch input entities are not correctly generated for Shelly 2.5 devices · Issue #56531 · home-assistant/core · GitHub

Shelly 2.5 entity shows as switch not light - Configuration - Home Assistant Community

Shelly support group (English Version), Hi, is cycle relay mode on the Shelly 2.5 still supported

Transform any device with Shelly and Home Assistant: A step by step guide for 3-WAY circuits

ISO: Smart 12v physical dimmer switch - Hardware - Home Assistant Community

Integrating Shelly 2.5 using MQTT - Hardware - Home Assistant Community

Shelly events only recorded for on, not off events - Shelly 2.5 · Issue #102583 · home-assistant/core · GitHub

Shelly 2.5